← All calculators / Business

CBM & container loading

Work out total CBM and weight for your cartons, how many fit in a 20ft, 40ft or high-cube container, and the best way to stack them.

01 / Your inputsBrowser-only calculation
Total CBM
—

See this load in 3D →Open these cartons in the free 3D load planner: mixed products, stacking limits, balance and a step-by-step loading view.

How it works

The formula

CBM = length × width × height ÷ 1,000,000 × cartons; cartons per container = best fit across orientations, capped by payload ÷ carton weight

Example inputs

Carton: 60 × 40 × 40 cm · 400 cartons at 18 kg · 40ft standard · upright only

Result: 38.4 m³ · 7,200 kg · 550 cartons fit per 40ft, so 1 container

Container sizes and payloads are typical ISO figures; check your line’s spec sheet and your road weight limit, which is often lower than the container’s payload.

Working out CBM, weight and how a container should be loaded

CBM — cubic metres — is how sea freight is measured and, for less-than-container loads, how it is priced. One carton's CBM is its length × width × height in centimetres divided by 1,000,000. With the example's 60 × 40 × 40 cm cartons that is 0.096 m³ each, so 400 of them come to 38.4 m³ and, at 18 kg each, 7,200 kg gross.

That total is the easy part. The question that costs money is how many containers it takes, and the answer is not total CBM divided by container CBM. Cartons are rigid boxes; a container is a box of a different shape, and the space left over at the end of each row, along each wall and under the roof is space you pay for and cannot use.

Why a "67 m³" container never takes 67 m³

A 40ft standard container is about 12.03 m long, 2.35 m wide and 2.39 m high inside. The best plan for the example's cartons runs one lane of cartons lengthwise along one wall, 20 deep, and fills the rest of the width with cartons turned the other way, 3 across and 30 deep. Stacked 5 high, that is 550 cartons, using 52.8 m³ of the box's 67.7. The remaining 22% is not carelessness: the two lanes leave 15 cm of width spare, and 5 tiers at 40 cm leave 39 cm of headroom that no 40 cm carton can use.

This is why the freight industry quotes practical figures well below the nominal ones — roughly 25–28 m³ for a 20ft and 55–58 m³ for a 40ft — and why the calculator reports the fill percentage for your carton size, not an average. Carton dimensions decide it. A 40 cm carton wastes 39 cm of a standard container's height; a 30 cm carton stacks 7 high and wastes 29.

How the loading plan is chosen

The calculator tries each way the carton can face — two if it must stay upright, six if it can lie on any side — and for each one counts how many fit across the width, how many tiers fit under the roof, and how many rows fit along the length. It then tries two refinements: leaving a strip at the door end and filling it with the carton turned another way, and splitting the width into two lanes that run the full length, each with the carton turned differently. It keeps whichever plan fits the most.

Those refinements matter more often than you would expect. A 48 × 40 × 30 cm carton in a 20ft container fits 420 as one simple block: 12 rows of 5, 7 high. Run one lane with the 40 cm side across and the rest with the 48 cm side across, and the same container takes 476, without turning any carton on its side. The drawing shows the main block in green and the turned cartons in amber.

Space-limited or weight-limited

Every container has a maximum payload, roughly 26,500–28,200 kg depending on size and line, and dense goods reach it long before the box is full. Tiles, paper, liquids and machine parts are weight-limited; furniture, textiles and plastics are almost always space-limited. The calculator takes whichever limit binds first and says which one it was.

The container's own limit is rarely the real one. Road rules for the truck that collects it are usually tighter — in many US states a 20ft container over about 17,000–19,000 kg of cargo needs a special permit or a tri-axle chassis. Check the limit for the inland leg before planning to the container's payload.

Choosing between a 20ft and a 40ft

The example's 400 cartons need two 20ft containers — each fits 255 — but only one 40ft, which fits 550 with room to spare. A 40ft usually costs well under twice a 20ft, so when a load spills over one 20ft the 40ft is usually the cheaper answer. A 40ft high cube adds 30 cm of height for little extra cost; with these cartons that is a sixth tier and 660 per container.

Pallets, mixed sizes and what it does not check

Pallets are optional: choose Euro (120 × 80 cm) or standard (120 × 100 cm) pallets, single or double-stacked, and the plan loads cartons onto pallets first and then pallets into the container — 25 Euro pallets in a 40ft, 11 in a 20ft. Extra carton sizes can be listed too, though each size is planned as its own block, so a mixed load usually fits a little better than the estimate. The calculator does not check load-bearing limits, where the bottom carton crushes under those above it; weight distribution along the container floor; or dunnage and bracing. For a mixed load with several products, stacking rules and a 3D view, use the free 3D container load planner; for high-value loads, a forwarder's load plan is worth asking for. For working out whether an order fits, which container to book, and roughly what it will cost to ship, this is the number to start with.

Common questions

How is CBM worked out from inches?
Switch Units to in / lb and enter inches and pounds directly; the result shows cubic metres and cubic feet. By hand, divide cubic inches by 61,024 to get cubic metres.
What is chargeable weight for LCL?
For less-than-container sea freight, carriers usually charge on whichever is greater: the CBM, or the weight in tonnes. 1 m³ is treated as 1,000 kg, so 3 m³ weighing 800 kg is charged as 3 revenue tonnes.
Should I tick "any side may face up"?
Only if the goods genuinely allow it. Cartons marked "this side up", liquids, and anything fragile must stay upright; tipping them for a better fill causes the damage claims it saved on.
How do I work out freight cost per carton?
Enter your quoted price per container in the freight cost field. The calculator multiplies it by the containers needed and divides by the cartons and the cubic metres, which is the figure to add to each unit's landed cost.

Your privacy

Nothing you type leaves your browser.

Related calculators

Volume ↗ · Kilograms to pounds ↗ · Density ↗ · Unit price ↗