← All calculators / Home

Roof area

Uniform-pitch roof area estimate.

01 / Your inputsBrowser-only calculation
Roof area
—
How it works

The formula

Sloped area = footprint × √(1+(pitch/12)²)

Example inputs

Horizontal footprint area (m²): 100 · Roof pitch rise per 12 run: 6 · Waste (%): 10

Result: 122.983739 · Estimated m² including waste

What the Roof area works out

The Roof area turns the figures below into roof area, using the formula Sloped area = footprint × √(1+(pitch/12)²). Uniform-pitch roof area estimate.

What each field means

Horizontal footprint area (m²)
A number; the example uses 100. It cannot go below 0.
Roof pitch rise per 12 run
A number; the example uses 6. Values must fall between 0 and 36.
Waste (%)
A yearly percentage typed as a plain number, so 10 means 10%. Values must fall between 0 and 100.

A worked example

With the values this page opens on — Horizontal footprint area (m²) 100, Roof pitch rise per 12 run 6, Waste (%) 10 — the answer is 122.98. The supporting detail reads: Estimated m² including waste. Reset restores exactly these numbers.

Reading the result

The result is labelled roof area. It is recalculated on every keystroke from the unrounded values in the form, and the accompanying graph follows the same numbers.

Assumptions and limits

Uniform-pitch roof area estimate. Footprint should include overhangs. Valleys, dormers, layout, and complex geometry need separate measurement.

Your privacy

Nothing you type leaves your browser.

Related calculators

Rectangle area ↗ · Surface area ↗ · Body surface area ↗ · Circle area ↗