What the Tire size works out
Give the Tire size the values it asks for and it reports tire size, worked out from the formula Diameter mm = wheel inches × 25.4 + 2 × width × aspect/100. Nominal unloaded dimensions, not a vehicle fitment recommendation.
What each field means
- Section width (mm)
- Measured in millimetres; the example uses 205. Values must fall between 1 and 1000.
- Aspect ratio (%)
- A yearly percentage typed as a plain number, so 55 means 55%. Values must fall between 1 and 100.
- Wheel diameter (inches)
- A number; the example uses 16. Values must fall between 1 and 50.
A worked example
With the values this page opens on — Section width (mm) 205, Aspect ratio (%) 55, Wheel diameter (inches) 16 — the answer is 631.9. The supporting detail reads: Diameter mm · Circumference: 1,985.17 mm · Revolutions/km: 503.73. Reset restores exactly these numbers.
Reading the result
The result is labelled tire size. It is recalculated on every keystroke from the unrounded values in the form, and the accompanying graph follows the same numbers.
Assumptions and limits
Nominal unloaded dimensions, not a vehicle fitment recommendation. Actual tire dimensions and clearance vary.
Your privacy
Nothing you type leaves your browser.
Related calculators
Sample size ↗ · Shoe size estimate ↗ · Data size ↗ · Bra size starting estimate ↗