← All calculators / Engineering

DC voltage drop

Two-conductor DC resistive circuit.

01 / Your inputsBrowser-only calculation
DC voltage drop
—
How it works

The formula

Drop = current × 2 × one-way length × resistance per metre

Example inputs

Current (A): 10 · One-way length (m): 20 · Conductor resistance (Ω/m): 0.005 · Supply voltage (V): 12

Result: 2 · Volts · 16.666667% of supply

What the DC voltage drop works out

Give the DC voltage drop the values it asks for and it reports DC voltage drop, worked out from the formula Drop = current × 2 × one-way length × resistance per metre. Two-conductor DC resistive circuit.

What each field means

Current (A)
An amount of money, entered without a currency symbol — the example uses 10. It cannot go below 0.
One-way length (m)
Measured in metres; the example uses 20. It cannot go below 0.
Conductor resistance (Ω/m)
A number; the example uses 0.005. It cannot go below 0.
Supply voltage (V)
A number; the example uses 12. It cannot go below 0.01.

A worked example

With the values this page opens on — Current (A) 10, One-way length (m) 20, Conductor resistance (Ω/m) 0.005, Supply voltage (V) 12 — the answer is 2. The supporting detail reads: Volts · 16.67% of supply. Reset restores exactly these numbers.

Reading the result

What you get back is DC voltage drop. Each edit recomputes the answer and redraws the chart from your own figures, so the displayed rounding never feeds back into the calculation.

Assumptions and limits

Two-conductor DC resistive circuit. Uses resistance you supply; does not account for temperature, reactance, connections, AC power factor, or electrical-code compliance.

Your privacy

Nothing you type leaves your browser.

Related calculators

Ohm’s law ↗ · Horsepower ↗ · Room air-conditioner capacity ↗ · Engine horsepower from torque ↗