How much paint to buy, and the number that ruins the estimate
The arithmetic is area divided by coverage, multiplied by coats. Forty square metres at 10 m² per litre, two coats, needs 8 litres. One coat would be 4. Nothing complicated — but two of the three inputs are routinely wrong.
Coverage is a best case
The figure printed on the tin is measured on a smooth, sealed, primed surface under laboratory conditions. Real walls take more. Textured plaster, bare masonry, previously unpainted drywall and anything porous can cut coverage by a third or more. Rollers also hold paint you never apply, and some is lost in the tray. Where the tin claims 10–12 m² per litre, entering 10 is sensible and entering 12 is wishful.
Colour matters too. Covering a dark wall with a pale colour, or using a strongly pigmented red or yellow, frequently needs three coats rather than two — and a tinted primer underneath usually costs less than a third topcoat.
Measuring the area
Wall area is perimeter times height. For a 4 m by 5 m room with 2.4 m ceilings, that is 18 m of perimeter times 2.4, so 43.2 m². Add the ceiling, if you are painting it, as length times width.
The usual question is whether to subtract doors and windows. For one door and one window, do not bother — the deduction is roughly offset by what you waste cutting in around them. For large glazing or several doors, subtract the openings, because the error stops being small.
Buy in the sizes that exist
The answer comes out in litres, and paint comes in tins. Needing 8 litres means two 5-litre tins or one 5 plus three 1-litre tins; there is no way to buy exactly 8. Rounding up to a full tin is normal and generally wise — paint from the same batch is the only guaranteed colour match, and keeping the remainder for touch-ups is worth more than the few dollars saved by buying short.
Common questions
- Does primer count as a coat?
- Not in this calculation. Primer has its own coverage rate, usually different from the topcoat's — run it as a separate calculation with one coat.
- What coverage should I assume if the tin does not say?
- Around 10 m² per litre is a reasonable planning figure for emulsion on a prepared interior wall. Gloss and specialist finishes differ, often considerably.
- How do I handle a gable or a sloped ceiling?
- Split it into a rectangle and a triangle. A triangle's area is half the base times the height; add it to the rectangular portion and enter the total.
Your privacy
Nothing you type leaves your browser.
Related calculators
Mulch quantity ↗ · Gravel quantity ↗ · Tile quantity ↗ · Roof area ↗