What the Resistors in series / parallel works out
Give the Resistors in series / parallel the values it asks for and it reports resistors in series / parallel, worked out from the formula Series R = sum; parallel R = 1 / sum(1/R). Ideal positive resistors.
What each field means
- Resistances (Ω)
- Entered as text rather than a single number — the example uses 100,200,300. Keep the same separators shown there.
- Connection
- Choose between Series, Parallel. The worked example below uses Series, and switching it changes which rule set the calculator applies.
A worked example
With the values this page opens on — Resistances (Ω) 100,200,300, Connection Series — the answer is 600. The supporting detail reads: Ohms. Reset restores exactly these numbers.
Reading the result
The result is labelled resistors in series / parallel. It is recalculated on every keystroke from the unrounded values in the form, and the accompanying graph follows the same numbers.
Assumptions and limits
Ideal positive resistors. Tolerances, frequency, and power ratings are excluded.
Your privacy
Nothing you type leaves your browser.
Related calculators
Ohm’s law ↗ · Horsepower ↗ · DC voltage drop ↗ · Room air-conditioner capacity ↗