What the Stair dimensions works out
This page computes stair dimensions. The Stair dimensions applies the formula Risers = ceiling(total rise / preferred riser); actual riser = rise/risers. Geometric layout only.
What each field means
- Total rise (cm)
- Measured in centimetres; the example uses 280. It cannot go below 0.01.
- Preferred maximum riser (cm)
- Measured in centimetres; the example uses 18. It cannot go below 0.01.
- Tread depth (cm)
- Measured in centimetres; the example uses 28. It cannot go below 0.01.
A worked example
With the values this page opens on — Total rise (cm) 280, Preferred maximum riser (cm) 18, Tread depth (cm) 28 — the answer is 16. The supporting detail reads: Risers · Each rise: 17.5 cm · Run with 15 treads: 420 cm. Reset restores exactly these numbers.
Reading the result
What you get back is stair dimensions. Each edit recomputes the answer and redraws the chart from your own figures, so the displayed rounding never feeds back into the calculation.
Assumptions and limits
Geometric layout only. Does not verify local building codes, landings, headroom, accessibility, or safety compliance.
Your privacy
Nothing you type leaves your browser.
Related calculators
Roof area ↗ · Mulch quantity ↗ · Square footage ↗ · Concrete volume ↗